- Type: Other
- Place of Origin: Guangdong, China (Mainland)
- Brand Name: LD
- Model Number: LD-3000A
- Voltage: 220V/110V
- Current: 50HZ
- Rated Capacity: 800-1600W
- Rated Duty Cycle: 80%
- Dimensions: 485*285*280 mm
- Weight: 15kg
- Usage: flex banner/canvas/poster/tarpaulin etc. welding
- Certification: CE
- After-sales Service Provided: No overseas service provided
- Product name: 2015 mini electric seam pvc hot air welding machine
- Air pressure: 2500Pa
- Air volume: 21m3/h
- Temperature range: 20-500℃
- Welding speed: 0.8-10 m/min
- Welding thickness: 0.2-2mm
- advertising industry: PVC, PE hot-melt plastic membranes
- Largest welding width: 3-4cm
- Warranty: One Year
- Function: Fold Welding
Packaging & Delivery
|Packaging Details:||carton packing|
|Delivery Detail:||within 3-5 days after payment|
2015 mini electric seam pvc hot air welding machine
The automatic welding machine is designed to weld plastic materials. The automatic welding machine can weld advertising inkjet fabric, inkjet cloth, light box cloth, thick PVC cloth, mesh cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted. It is small, light and easy to operate. It is equipped with temperature feedback sensor. The sensor can always monitoring the temperature of the outlet to keep a constant temperature. It uses advanced PID control technology, and adjust the power to make the temperature more constant automatically,the fluctuation is within 1 degrees. This function can make the welding result stronger. It also can avoid leakage. This machine is more suited to fast welding of large roofs
110V welding heater and 220v welding heater(in the right)
Largest welding width
Electric shock protection category
1. A 10m power cable.
2. A Wrench
3. One heater
4. One piece of m
5. Video CD
Parts of hot air welding machine
1. Power button 2. Power jack 3. Operation handle Gliding wheel handle
4. Temperate knob 5. Speed regulation knob 6. Wind regulation knob
7. Crank 8.Link cable 9. Wing sheath
10. Heat gun 11.Temperature feedback sensor 12. Nozzle
13. Press wheel 14.Practical temperature display 15. Set temperature Display 16. The buttons turn up temperature 17. The button turns down temperature
Sequence of operation
1. First, make the picture smooth and tight, take jointer to accurate (about 2-4cm), fixed edges with tape or glue on the ground.
2. Open the power, turning handle to left to keep hot air nozzle and the rubber tire is on the straight line. Then turn the right black knob to adjust the speed, generally marked on the knob points to the location between 2 from 4.After setup, turning the handle to right until the hot air out of the ground.
3. Set the temperature degree. Open temperature switch, And turn the golden knob until it clicks and then follow the button to the end. for up for down, set the desired temperature according to thickness of picture.In general, the temperature is between 300-350℃,Or taking some picture material to aligned nozzle, If it can be melted immediately, This temperature is the one you need and to set.
4. In the welding process, if printing material is burnt, the first thing to slow down the speed or low the temperature,This can avoid to burnt picture material,but do not increase speed rapidly, otherwise the machine will run too fast to make it go straightly,this will cause the picture can not be spliced and damage the picture.
5. Before using, please find the proper temperature and speed according to your printing material. If the speed is too slow it could burn the picture, while too fast to welding strong. Therefore, It is very important that the temperature and speed are good match.
6. After welding, turning the handle to right to keep hot air gun from picture completely,then turn off the temperature switch(Left the gold knob until it make a voice of clicks).No lugging the power cord and turning the power off directly,to avoid heat damage to the hot air gun.After temperature of the machine must be reduced to below 50 ℃,you can plug the power or main switch.
7. Don’t use it in rainy day,the workplace should be dry, flat and safety of fire.The machine should have technical person to operate, it is forbid that someone use it without specific knowledge. Working voltage:110V—220V. Strictly prohibited without permission disassemble,you should be responsible the result yourself.
You mustn’t turn off the machine until the welding machine will completely cool down in a few minutes. Then pull out the plug.
Preparation before using the machine
1. You should adjust the temperature and speed according to the thickness of your materials.
2. Fix the cloth on the smooth ground to make sure the best result.
1. Clean the nozzle with copper brush.
2. Clean the air inlet with soft bristle brush.
3. Check the power cord and plugs to avoid any mechanical damage.
Shenzhen Brightness Electronic Technology Co., Ltd. from its inception in 2006, has been committed to production and sales of professional advertising equipment and heat transfer equipment. we export to Southeast Asia, the Middle East, Africa, Europe, America and other parts of the world and gain fame from Chinese and foreign clients.Brightness hold the spirit of high-tech, high-quality, good service, dedicating to providing the best products and service for customers. "Learning, innovation, cooperation and upgrading"is our corporate philosophy.During building a friendly cooperation with internal and external partners, our step never cease to improve quality of products and service, enhance corporate image , promote company and social efficiency, aiming to create a win-win situation and tailor the right solution for our customers. Brightness will serve old and new customers better with the unswerving technology advantage and market style, move on for the more prosperous future.
1. We have the technology departments, Its able to solve technical problems on time
2. We have rich experience and professional of advertising equipment and heat transfer equipment
3. Special appearance and structure not only practical, but also fashion
4. We have been update products anytime.lets customers have more choices
5. We have very good after sale service, we provide service of one year warranty
2.3-5 days for machines after payment .
3. Shipping:According to the normal charge by DHL or Others
1.How to handle installation and repair machine about questions after-sale service ?
- We provide online or remote service about work time, we are face to face to solve your problem online
2.How about the products of Warranty ?
- We provide main parts of products about one year warranty when you use it by normally
3. Are u the manufacturers ?
- Yes .we produce most of products and accessories we also have our factory
4.Whats kind of payment you accept ?
- We can accept many payment such as:T/C T/T Western Union Paypal and so on
4.Why choose us ?
- Our machine export to over 60 countries ,we have rich experience to do the export and the stability of the machine won great reputation from our clients
- If any technical issues, you can contact with our technician directly. They will help you solve the problem by Skype or email. So you can rest assured about the after service.
- We provide free training in our factory or company .
5.How to order ?
- After confirmed order details ,we will make Commercial invoice for you .
- We will prepare and arrange the delivery for your goods ASAP once check your payment